 Masonry Hex / Slotted Head Screws 5.3 x 57mm Pack of 100 £5.99
Dual single, hi-lo diamond thread form with corrosion resistant, blue ruspert finish. Hex head with Slot for socket or screwdriver application. more...
|
 Masonry Hex / Slotted Head Screws 6.3 x 100mm Pack of 100 £19.79
Dual single, hi-lo diamond thread form with corrosion resistant, blue ruspert finish. Hex head with Slot for socket or screwdriver application. more...
|
 Masonry Hex / Slotted Head Screws 6.3 x 57mm Pack of 100 £8.69
Dual single, hi-lo diamond thread form with corrosion resistant, blue ruspert finish. Hex head with Slot for socket or screwdriver application. more...
|
 Masonry Hex / Slotted Head Screws 6.3 x 70mm Pack of 100 £11.09
Dual single, hi-lo diamond thread form with corrosion resistant, blue ruspert finish. Hex head with Slot for socket or screwdriver application. more...
|
 Masonry Phillips Head Screws 5.3 x 57mm Pack of 100 £12.69
Just drill through the part being fixed to the masonry, then drive the screw in. Dual angle thread with hi-lo threadform. Extra hard steel with chromate finish. Use 4mm pilot for 5.3mm screws and 5mm drill for 6.4mm screws. more...
|
 Masonry Phillips Head Screws 5.3 x 70mm Pack of 100 £13.79
Just drill through the part being fixed to the masonry, then drive the screw in. Dual angle thread with hi-lo threadform. Extra hard steel with chromate finish. Use 4mm pilot for 5.3mm screws and 5mm drill for 6.4mm screws. more...
|
 Masonry Phillips Head Screws 6.4 x 100mm Pack of 100 £23.79
Just drill through the part being fixed to the masonry, then drive the screw in. Dual angle thread with hi-lo threadform. Extra hard steel with chromate finish. Use 4mm pilot for 4.8mm screws and 5mm drill for 6.4mm screws. more...
|
 Spit Tapcon Condrive Drill Driver Installation Kit £23.88
Unique Buildex Tapcon Condrive Kit containing everything required for Phillips or Hex heads. Enables rapid change from drilling to fixing and reduces installation time by up to 73%. Eliminates the need for for two tools as well as the need to change chucks and bits. more...
|
 Spit Tapcon Countersunk Concrete Screws 6 x 100mm Pack of 100 £16.61
Cuts thread into concrete, brick and hollow block. Removable, adjustable and reusable. No need for plugs or pre-marking. Reversed hi-lo thread and blue climaseal finish. Suitable for use close to edges and approved for pre-cast hollow pot beams. Specifications: Kesternich results 30 cycles, 10% or less rust. Salt spray results 750 hours, 10% or less rust. more...
|
 Spit Tapcon Countersunk Concrete Screws 6 x 32mm Pack of 100 £10.37
Cuts thread into concrete, brick and hollow block. Removable, adjustable and reusable. No need for plugs or pre-marking. Reversed hi-lo thread and blue climaseal finish. Use close to edges and approved for pre-cast hollow pot beams. Specifications: Kesternich results 30 cycles, 10% or less rust. Salt spray results 750 hours, 10% or less rust. more...
|
 Spit Tapcon Countersunk Concrete Screws 6 x 45mm Pack of 100 £10.89
Cuts thread into concrete, brick and hollow block. Removable, adjustable and reusable. No need for plugs or pre-marking. Reversed hi-lo thread and blue climaseal finish. Use close to edges and approved for pre-cast hollow pot beams. Specifications: Kesternich results 30 cycles, 10% or less rust. Salt spray results 750 hours, 10% or less rust. more...
|
 Spit Tapcon Countersunk Concrete Screws 6 x 57mm Pack of 100 £12.87
Cuts thread into concrete, brick and hollow block. Removable, adjustable and reusable. No need for plugs or pre-marking. Reversed hi-lo thread and blue climaseal finish. Use close to edges and approved for pre-cast hollow pot beams. Specifications: Kesternich results 30 cycles, 10% or less rust. Salt spray results 750 hours, 10% or less rust. more...
|
 Spit Tapcon Countersunk Concrete Screws 6 x 70mm Pack of 100 £14.01
Cuts thread into concrete, brick and hollow block. Removable, adjustable and reusable. No need for plugs or pre-marking. Reversed hi-lo thread and blue climaseal finish. Use close to edges and approved for pre-cast hollow pot beams. Specifications: Kesternich results 30 cycles, 10% or less rust. Salt spray results 750 hours, 10% or less rust. more...
|
 Spit Tapcon Countersunk Concrete Screws 6 x 82mm Pack of 100 £15.47
Cuts thread into concrete, brick and hollow block. Removable, adjustable and reusable. No need for plugs or pre-marking. Reversed hi-lo thread and blue climaseal finish. Use close to edges and approved for pre-cast hollow pot beams. Specifications: Kesternich results 30 cycles, 10% or less rust. Salt spray results 750 hours, 10% or less rust. more...
|
 Spit Tapcon Hex Head Concrete Screws 6 x 100mm Pack of 100 £16.61
Cuts thread into concrete, brick and hollow block. Removable, adjustable and reusable. No need for plugs or pre-marking. Reversed hi-lo thread and blue climaseal finish. Use close to edges and approved for pre-cast hollow pot beams. For easy installation use the Masonry Condrive Kit (Quote 29747). Specifications: Kesternich results 30 cycles, 10% or less rust. Salt spray results 750 hours, 10% or less rust. more...
|
 Spit Tapcon Hex Head Concrete Screws 6 x 32mm Pack of 100 £10.37
Cuts thread into concrete, brick and hollow block. Removable, adjustable and reusable. No need for plugs or pre-marking. Reversed hi-lo thread and blue climaseal finish. Use close to edges and approved for pre-cast hollow pot beams. For easy installation use the Masonry Condrive Kit (Quote 29747). Specifications: Kesternich results 30 cycles, 10% or less rust. Salt spray results 750 hours, 10% or less rust. more...
|
 Spit Tapcon Hex Head Concrete Screws 6 x 45mm Pack of 100 £10.89
Cuts thread into concrete, brick and hollow block. Removable, adjustable and reusable. No need for plugs or pre-marking. Reversed hi-lo thread and blue climaseal finish. Use close to edges and approved for pre-cast hollow pot beams. For easy installation use the Masonry Condrive Kit (Quote 29747). Specifications: Kesternich results 30 cycles, 10% or less rust. Salt spray results 750 hours, 10% or less rust. more...
|
 Spit Tapcon Hex Head Concrete Screws 6 x 57mm Pack of 100 £12.87
Cuts thread into concrete, brick and hollow block. Removable, adjustable and reusable. No need for plugs or pre-marking. Reversed hi-lo thread and blue climaseal finish. Use close to edges and approved for pre-cast hollow pot beams. For easy installation use the Masonry Condrive Kit (Quote 29747). Specifications: Kesternich results 30 cycles, 10% or less rust. Salt spray results 750 hours, 10% or less rust. more...
|
 Spit Tapcon Hex Head Concrete Screws 6 x 70mm Pack of 100 £14.01
Cuts thread into concrete, brick and hollow block. Removable, adjustable and reusable. No need for plugs or pre-marking. Reversed hi-lo thread and blue climaseal finish. Use close to edges and approved for pre-cast hollow pot beams. For easy installation use the Masonry Condrive Kit (Quote 29747). Specifications: Kesternich results 30 cycles, 10% or less rust. Salt spray results 750 hours, 10% or less rust. more...
|
 Spit Tapcon Hex Head Concrete Screws 6 x 82mm Pack of 100 £15.47
Cuts thread into concrete, brick and hollow block. Removable, adjustable and reusable. No need for plugs or pre-marking. Reversed hi-lo thread and blue climaseal finish. Use close to edges and approved for pre-cast hollow pot beams. For easy installation use the Masonry Condrive Kit (Quote 29747). Specifications: Kesternich results 30 cycles, 10% or less rust. Salt spray results 750 hours, 10% or less rust. more...
|
 Spit Tapcon SDS+ Masonry Drill Bit 5 x 180mm £9.33
Cuts up to 100mm thread into concrete, brick and hollow block. Removable, adjustable and reusable. No need for plugs or pre-marking. Reversed hi-lo thread and blue climaseal finish. Use close to edges and approved for pre-cast hollow pot beams. For easy installation use the Masonry Condrive Kit (Quote 29747). more...
|
Buy plants |
Seeds | Plants
| Sheepskin slippers |
Sheepskin boots
Ugg Boots |
Design
| Deck |
Patio |
Lawns |
Questions
| Sheds |
Supplies |
Services
