 FloPlast 135 (45) Bend White 32mm Pack of 5 £3.99
Installs easily where access is limited. Fits most standard size waste pipe (excluding universal push fit waste). Requires no tightening. A lightweight yet strong and cost-effective option. Apply solvent cement evenly to both surfaces of joint, insert pipe fully into the socket depth and remove surplus cement with a cloth. Allow five minutes to set before handling and twelve hours before testing the system. It is recommended that externally installed ABS waste systems are protected against prolonged exposure to sunlight with exterior gloss paint. Features: Manufactured to BS EN 1455-1: 2000 / BS 5255. more...
|
 FloPlast 135 (45) Bend White 40mm Pack of 5 £3.99
Installs easily where access is limited. Fits most standard size waste pipe (excluding universal push fit waste). Requires no tightening. A lightweight yet strong and cost-effective option. Apply solvent cement evenly to both surfaces of joint, insert pipe fully into the socket depth and remove surplus cement with a cloth. Allow five minutes to set before handling and twelve hours before testing the system. It is recommended that externally installed ABS waste systems are protected against prolonged exposure to sunlight with exterior gloss paint. Features: Manufactured to BS EN 1455-1: 2000 / BS 5255. Specifications: BS EN 1455-1: 2000 more...
|
 FloPlast 90 Bend White 32mm Pack of 5 £3.99
Installs easily where access is limited. Fits most standard size waste pipe (excluding universal push fit waste). Requires no tightening. A lightweight yet strong and cost-effective option. Apply solvent cement evenly to both surfaces of joint, insert pipe fully into the socket depth and remove surplus cement with a cloth. Allow five minutes to set before handling and twelve hours before testing the system. It is recommended that externally installed ABS waste systems are protected against prolonged exposure to sunlight with exterior gloss paint. Features: Manufactured to BS EN 1455-1: 2000 / BS 5255. more...
|
 FloPlast 90 Bend White 40mm Pack of 5 £3.99
Installs easily where access is limited. Fits most standard size waste pipe (excluding universal push fit waste). Requires no tightening. A lightweight yet strong and cost-effective option. Apply solvent cement evenly to both surfaces of joint, insert pipe fully into the socket depth and remove surplus cement with a cloth. Allow five minutes to set before handling and twelve hours before testing the system. It is recommended that externally installed ABS waste systems are protected against prolonged exposure to sunlight with exterior gloss paint. Features: Manufactured to BS EN 1455-1: 2000 / BS 5255. more...
|
 Floplast 90 Conversion Bend 32mm White Pack of 5 £3.99
32mm 90 Bend. Features: Domestic/Commercial Waste Systems; Kitemarked; BS EN 1455-1; Installs Easily where Access is Limited; A Lightweight Yet Strong Cost- Effective Option. more...
|
 Floplast 90 Conversion Bend 40mm White Pack of 5 £3.99
40mm 90 Bend. Features: Domestic/Commercial Waste Systems; Kitemarked; BS EN 1455-1; Installs Easily where Access is Limited; A Lightweight Yet Strong Cost- Effective Option. more...
|
 FloPlast 92.5 (87.5) Bend White 32mm Pack of 5 £3.99
Installs easily where access is limited. Fits most standard size waste pipe (excluding universal push fit waste). Requires no tightening. A lightweight yet strong and cost-effective option. Apply solvent cement evenly to both surfaces of joint, insert pipe fully into the socket depth and remove surplus cement with a cloth. Allow five minutes to set before handling and twelve hours before testing the system. It is recommended that externally installed ABS waste systems are protected against prolonged exposure to sunlight with exterior gloss paint. Features: Manufactured to BS EN 1455-1: 2000 / BS 5255. more...
|
 FloPlast 92.5 (87.5) Bend White 40mm Pack of 5 £3.99
Installs easily where access is limited. Fits most standard size waste pipe (excluding universal push fit waste). Requires no tightening. A lightweight yet strong and cost-effective option. Apply solvent cement evenly to both surfaces of joint, insert pipe fully into the socket depth and remove surplus cement with a cloth. Allow five minutes to set before handling and twelve hours before testing the system. It is recommended that externally installed ABS waste systems are protected against prolonged exposure to sunlight with exterior gloss paint. Features: Manufactured to BS EN 1455-1: 2000 / BS 5255. more...
|
 FloPlast ABS Access Plug White 40mm Pack of 5 £3.99
Allows access into the waste system. Fits most standard size waste pipe (excluding universal push fit waste). Requires no tightening. A lightweight yet strong and cost-effective option. Apply solvent cement evenly to both surfaces of joint, insert pipe fully into the socket depth and remove surplus cement with a cloth. Allow five minutes to set before handling and twelve hours before testing the system. It is recommended that externally installed ABS waste systems are protected against prolonged exposure to sunlight with exterior gloss paint. Features: Manufactured to BS EN 1455-1: 2000 / BS 5255. more...
|
 FloPlast ABS Access Plugs White 32mm Pack of 5 £3.99
Fits all standard waste pipe (excl. universal push fit waste). Manufactured to BS EN 1455-1:2000 / BS 5255. more...
|
 FloPlast Air Admittance Valve 32 x 40 x 50mm £10.07
Universal valve to fit standard 32, 40 and 50mm solvent weld waste pipe. BS EN 12380. more...
|
 FloPlast Equal Tees White 32mm Pack of 3 £2.49
Fits most standard size waste pipe (excluding universal push fit waste). A lightweight yet strong and cost-effective option. Apply solvent cement evenly to both surfaces of joint, insert pipe fully into the socket depth and remove surplus cement with a cloth. Allow five minutes to set before handling and twelve hours before testing the system. It is recommended that externally installed ABS waste systems are protected against prolonged exposure to sunlight with exterior gloss paint. Features: Manufactured to BS EN 1455-1: 2000 / BS 5255. more...
|
 FloPlast Equal Tees White 40mm Pack of 3 £2.49
Fits most standard size waste pipe (excluding universal push fit waste). A lightweight yet strong and cost-effective option. Apply solvent cement evenly to both surfaces of joint, insert pipe fully into the socket depth and remove surplus cement with a cloth. Allow five minutes to set before handling and twelve hours before testing the system. It is recommended that externally installed ABS waste systems are protected against prolonged exposure to sunlight with exterior gloss paint. Features: Manufactured to BS EN 1455-1: 2000 / BS 5255. more...
|
 FloPlast Reducer White 40 x 32mm Pack of 5 £3.99
Installs easily where access is limited. Reduces 40mm pipe down to 32mm. Fits most standard size waste pipe (excluding universal push fit waste). A lightweight yet strong and cost-effective option. Apply solvent cement evenly to both surfaces of joint, insert pipe fully into the socket depth and remove surplus cement with a cloth. Allow five minutes to set before handling and twelve hours before testing the system. It is recommended that externally installed ABS waste systems are protected against prolonged exposure to sunlight with exterior gloss paint. Features: Manufactured to BS EN 1455-1: 2000 / BS 5255. more...
|
 FloPlast Straight Coupling White 32mm Pack of 5 £3.99
Fits most standard size waste pipes (excluding universal push fit waste). A lightweight yet strong and cost-effective option. Apply solvent cement evenly to both surfaces of joint, insert pipe fully into the socket depth and remove surplus cement with a cloth. Allow five minutes to set before handling and twelve hours before testing the system. It is recommended that externally installed ABS waste systems are protected against prolonged exposure to sunlight with exterior gloss paint. Features: Manufactured to BS EN 1455-1: 2000 / BS 5255. Specifications: BS EN 1455-1: 2000 more...
|
 FloPlast Straight Coupling White 40mm Pack of 5 £3.99
Fits most standard size waste pipes (excluding universal push fit waste). A lightweight yet strong and cost-effective option. Apply solvent cement evenly to both surfaces of joint, insert pipe fully into the socket depth and remove surplus cement with a cloth. Allow five minutes to set before handling and twelve hours before testing the system. It is recommended that externally installed ABS waste systems are protected against prolonged exposure to sunlight with exterior gloss paint. Features: Manufactured to BS EN 1455-1: 2000 / BS 5255. more...
|
 FloPlast Waste Pipe 32mm Pack of 10 £33.9
30m (10 x 3m). A lightweight yet strong and cost-effective option. Apply solvent cement evenly to both surfaces of joint, insert pipe fully into the socket depth and remove surplus cement with a cloth. Allow five minutes to set before handling and twelve hours before testing the system. It is recommended that externally installed ABS waste systems are protected against prolonged exposure to sunlight with exterior gloss paint. Features: Manufactured to BS EN 1455-1: 2000 / BS 5255. more...
|
 FloPlast Waste Pipe 40mm x 3m Pack of 10 £39.9
30m (10 x 3m). A lightweight yet strong and cost-effective option. Apply solvent cement evenly to both surfaces of joint, insert pipe fully into the socket depth and remove surplus cement with a cloth. Allow five minutes to set before handling and twelve hours before testing the system. It is recommended that externally installed ABS waste systems are protected against prolonged exposure to sunlight with exterior gloss paint. Features: Manufactured to BS EN 1455-1: 2000 / BS 5255. more...
|
Buy plants |
Seeds | Plants
| Sheepskin slippers |
Sheepskin boots
Ugg Boots |
Design
| Deck |
Patio |
Lawns |
Questions
| Sheds |
Supplies |
Services
