 FloPlast 135 (45) Bend Grey 32mm Pack of 5 £3.99
Installs easily where access is limited. Fits most standard size waste pipe (excluding universal push fit waste). Requires no tightening. A lightweight yet strong and cost-effective option. Apply solvent cement evenly to both surfaces of joint, insert pipe fully into the socket depth and remove surplus cement with a cloth. Allow five minutes to set before handling and twelve hours before testing the system. It is recommended that externally installed ABS waste systems are protected against prolonged exposure to sunlight with exterior gloss paint. Features: Manufactured to BS EN 1455-1: 2000 / BS 5255. more...
|
 FloPlast 135 (45) Bend Grey 40mm Pack of 5 £3.99
Installs easily where access is limited. Fits most standard size waste pipe (excluding universal push fit waste). Requires no tightening. A lightweight yet strong and cost-effective option. Apply solvent cement evenly to both surfaces of joint, insert pipe fully into the socket depth and remove surplus cement with a cloth. Allow five minutes to set before handling and twelve hours before testing the system. It is recommended that externally installed ABS waste systems are protected against prolonged exposure to sunlight with exterior gloss paint. Features: Manufactured to BS EN 1455-1: 2000 / BS 5255. more...
|
 FloPlast 90 Bend Grey 32mm Pack of 5 £3.99
Installs easily where access is limited. Fits most standard size waste pipe (excluding universal push fit waste). Requires no tightening. A lightweight yet strong and cost-effective option. Apply solvent cement evenly to both surfaces of joint, insert pipe fully into the socket depth and remove surplus cement with a cloth. Allow five minutes to set before handling and twelve hours before testing the system. It is recommended that externally installed ABS waste systems are protected against prolonged exposure to sunlight with exterior gloss paint. Features: Manufactured to BS EN 1455-1: 2000 / BS 5255. more...
|
 FloPlast 90 Bend Grey 40mm Pack of 5 £3.99
Installs easily where access is limited. Fits most standard size waste pipe (excluding universal push fit waste). Requires no tightening. A lightweight yet strong and cost-effective option. Apply solvent cement evenly to both surfaces of joint, insert pipe fully into the socket depth and remove surplus cement with a cloth. Allow five minutes to set before handling and twelve hours before testing the system. It is recommended that externally installed ABS waste systems are protected against prolonged exposure to sunlight with exterior gloss paint. Features: Manufactured to BS EN 1455-1: 2000 / BS 5255. Specifications: BS EN 1455-1: 2000 more...
|
 Floplast 90 Conversion Bend 32mm Grey Pack of 5 £3.99
32mm 90 Bend. Features: Domestic/Commercial Waste Systems; Kitemarked; BS EN 1455-1; Installs Easily where Access is Limited; A Lightweight Yet Strong Cost-Effective Option. more...
|
 Floplast 90 Conversion Bend 40mm Grey Pack of 5 £3.99
40mm 90 Bend. Features: Domestic/Commercial Waste Systems; Kitemarked; BS EN 1455-1; Installs Easily where Access is Limited; A Lightweight Yet Strong Cost- Effective Option. more...
|
 FloPlast 92.5 (87.5) Bend Grey 32mm Pack of 5 £3.99
Installs easily where access is limited. Fits most standard size waste pipe (excluding universal push fit waste). Requires no tightening. A lightweight yet strong and cost-effective option. Apply solvent cement evenly to both surfaces of joint, insert pipe fully into the socket depth and remove surplus cement with a cloth. Allow five minutes to set before handling and twelve hours before testing the system. It is recommended that externally installed ABS waste systems are protected against prolonged exposure to sunlight with exterior gloss paint. Features: Manufactured to BS EN 1455-1: 2000 / BS 5255. more...
|
 FloPlast 92.5 (87.5) Bend Grey 40mm Pack of 5 £3.99
Installs easily where access is limited. Fits most standard size waste pipe (excluding universal push fit waste). Requires no tightening. A lightweight yet strong and cost-effective option. Apply solvent cement evenly to both surfaces of joint, insert pipe fully into the socket depth and remove surplus cement with a cloth. Allow five minutes to set before handling and twelve hours before testing the system. It is recommended that externally installed ABS waste systems are protected against prolonged exposure to sunlight with exterior gloss paint. Features: Manufactured to BS EN 1455-1: 2000 / BS 5255. more...
|
 FloPlast ABS Access Plug Grey 32mm Pack of 5 £3.99
Allows access into the waste system. Fits most standard size waste pipe (excluding universal push fit waste). Requires no tightening. A lightweight yet strong and cost-effective option. Apply solvent cement evenly to both surfaces of joint, insert pipe fully into the socket depth and remove surplus cement with a cloth. Allow five minutes to set before handling and twelve hours before testing the system. It is recommended that externally installed ABS waste systems are protected against prolonged exposure to sunlight with exterior gloss paint. Features: Manufactured to BS EN 1455-1: 2000 / BS 5255. more...
|
 FloPlast ABS Access Plugs Grey 40mm Pack of 5 £3.99
Allows access into the waste system. Fits most standard size waste pipe (excluding universal push fit waste). A lightweight yet strong and cost-effective option. Apply solvent cement evenly to both surfaces of joint, insert pipe fully into the socket depth and remove surplus cement with a cloth. Allow five minutes to set before handling and twelve hours before testing the system. It is recommended that externally installed ABS waste systems are protected against prolonged exposure to sunlight with exterior gloss paint. Features: Manufactured to BS EN 1455-1: 2000 / BS 5255. more...
|
 FloPlast Equal Tees Grey 32mm Pack of 3 £2.49
Fits most standard size waste pipe (excluding universal push fit waste). A lightweight yet strong and cost-effective option. Apply solvent cement evenly to both surfaces of joint, insert pipe fully into the socket depth and remove surplus cement with a cloth. Allow five minutes to set before handling and twelve hours before testing the system. It is recommended that externally installed ABS waste systems are protected against prolonged exposure to sunlight with exterior gloss paint. Features: Manufactured to BS EN 1455-1: 2000 / BS 5255. more...
|
 FloPlast Equal Tees Grey 40mm Pack of 3 £2.49
High quality ABS fitting. Fits most standard size waste pipe (excluding universal push fit waste). A lightweight yet strong and cost-effective option. Apply solvent cement evenly to both surfaces of joint, insert pipe fully into the socket depth and remove surplus cement with a cloth. Allow five minutes to set before handling and twelve hours before testing the system. It is recommended that externally installed ABS waste systems are protected against prolonged exposure to sunlight with exterior gloss paint. Features: Manufactured to BS EN 1455-1: 2000 / BS 5255. more...
|
 FloPlast Pipe Clips Grey 32mm Pack of 20 £6.59
Use with ABS fittings. A lightweight yet strong and cost-effective option. Fix pipe clips at max 1.2m centres vertical and max 0.5m centres horizontal for 32mm and 40mm, 0.6m centres for 50mm. No expansion gap required on the solvent weld overflow system. Apply solvent cement evenly to both surfaces of joint, insert pipe fully into the socket depth and remove surplus cement with a cloth. Allow five minutes to set before handling and twelve hours before testing the system. It is recommended that externally installed ABS waste systems are protected against prolonged exposure to sunlight with exterior gloss paint. Features: Manufactured to BS EN 1455-1: 2000 / BS 5255. more...
|
 FloPlast Pipe Clips Grey 40mm Pack of 20 £6.59
Use with ABS fittings. A lightweight yet strong and cost-effective option. Fix pipe clips at max 1.2m centres vertical and max 0.5m centres horizontal for 32mm and 40mm, 0.6m centres for 50mm. No expansion gap required on the solvent weld overflow system. Apply solvent cement evenly to both surfaces of joint, insert pipe fully into the socket depth and remove surplus cement with a cloth. Allow five minutes to set before handling and twelve hours before testing the system. It is recommended that externally installed ABS waste systems are protected against prolonged exposure to sunlight with exterior gloss paint. Features: Manufactured to BS EN 1455-1: 2000 / BS 5255. Specifications: BS EN 1455-1: 2000 more...
|
 FloPlast Reducer Grey 40 x 32mm Pack of 5 £3.99
Reduces 40mm pipe down to 32mm. Fits most standard size waste pipe (excluding universal push fit waste). A lightweight yet strong and cost-effective option. Apply solvent cement evenly to both surfaces of joint, insert pipe fully into the socket depth and remove surplus cement with a cloth. Allow five minutes to set before handling and twelve hours before testing the system. It is recommended that externally installed ABS waste systems are protected against prolonged exposure to sunlight with exterior gloss paint. Features: Manufactured to BS EN 1455-1: 2000 / BS 5255. Specifications: BS EN 1455 - 1: 2000 more...
|
 FloPlast Straight Coupling Grey 32mm Pack of 5 £3.99
Fits most standard size waste pipes (excluding universal push fit waste). A lightweight yet strong and cost-effective option. Apply solvent cement evenly to both surfaces of joint, insert pipe fully into the socket depth and remove surplus cement with a cloth. Allow five minutes to set before handling and twelve hours before testing the system. It is recommended that externally installed ABS waste systems are protected against prolonged exposure to sunlight with exterior gloss paint. Features: Manufactured to BS EN 1455-1: 2000 / BS 5255. more...
|
 FloPlast Straight Coupling Grey 40mm Pack of 5 £3.99
Installs easily where access is limited. Fits most standard size waste pipes (excluding universal push fit waste). A lightweight yet strong and cost-effective option. Apply solvent cement evenly to both surfaces of joint, insert pipe fully into the socket depth and remove surplus cement with a cloth. Allow five minutes to set before handling and twelve hours before testing the system. It is recommended that externally installed ABS waste systems are protected against prolonged exposure to sunlight with exterior gloss paint. Features: Manufactured to BS EN 1455-1: 2000 / BS 5255. more...
|
 FloPlast Waste Pipe Grey 32mm Pack of 10 £33.9
30m (10 x 3m). A lightweight yet strong and cost-effective option. Apply solvent cement evenly to both surfaces of joint, insert pipe fully into the socket depth and remove surplus cement with a cloth. Allow five minutes to set before handling and twelve hours before testing the system. It is recommended that externally installed ABS waste systems are protected against prolonged exposure to sunlight with exterior gloss paint. Features: Manufactured to BS EN 1455-1: 2000 / BS 5255. more...
|
 FloPlast Waste Pipe Grey 40mm Pack of 10 £39.9
30m (10 x 3m). A lightweight yet strong and cost-effective option. Apply solvent cement evenly to both surfaces of joint, insert pipe fully into the socket depth and remove surplus cement with a cloth. Allow five minutes to set before handling and twelve hours before testing the system. It is recommended that externally installed ABS waste systems are protected against prolonged exposure to sunlight with exterior gloss paint. Features: Manufactured to BS EN 1455-1: 2000 / BS 5255. more...
|
Buy plants |
Seeds | Plants
| Sheepskin slippers |
Sheepskin boots
Ugg Boots |
Design
| Deck |
Patio |
Lawns |
Questions
| Sheds |
Supplies |
Services
