 Copper / MDPE Adaptor Kit 22 x 25mm £3.99
Simple and quick to connect, suitable for use below ground on cold water services. Resistant to pull-out. Excellent pressure resistance, tested to 48bar. Comfortably exceeds the performance requirements of UK Water Bylaws Scheme. MDPE Fittings are WRAS approved, certificate number 0507060. BS 6572: 1985. Specifications: Connects 22mm copper to 25mm MDPE. more...
|
 FloPlast Copper / MDPE Adaptor Kit 15 x 20mm £2.99
Simple and quick to connect, suitable for use below ground on cold water services. Resistant to pull-out. Excellent pressure resistance, tested to 48bar. Comfortably exceeds the performance requirements of UK Water Bylaws Scheme. MDPE Fittings are WRAS approved, certificate number 0507060. BS 6572: 1985. Specifications: Connects 15mm copper to 20mm MDPE. more...
|
 FloPlast Female Pipe Adaptor 20mm x £2.75
Female Pipe Adaptor. Features: Domestic / Commercial; Demountable & Re-usable; BS6572; WRAS Approved. more...
|
 FloPlast Male Pipe Adaptor 20mm x £2.79
Pipe Adaptor. Features: Domestic / Commercial; Demountable & Re-usable; BS6572; WRAS Approved. more...
|
 FloPlast MDPE Coupler 25 x 25mm £2.24
High quality compression fitting for MDPE pipe. Suitable for use below ground on cold water services. All fittings have a co-polymer polypropylene body, nut and thrust ring, acetal grab ring and nitrile seal. High impact resistant body and nut enables absorption of thermal and mechanical stress. Excellent pressure resistance, tested to 48bar. Simple and quick to connect - no need to dismantle the connecter nor chamfer the pipe, just cut the pipe, lubricate the seal, undo the nut a few turns, insert the pipe liner/insert, push the pipe in as far as it will go, tighten the nut and its done! Comfortably exceeds the performance requirements of UK Water Bylaws Scheme. MDPE Fittings are WRAS approved, certificate number 0507060. more...
|
 FloPlast MDPE Elbow 20mm £3.49
MDPE Elbow. Features: Domestic / Commercial; Demountable & Re-usable; BS6572; WRAS Approved. more...
|
 FloPlast MDPE Elbow 25mm £3.49
High quality compression fitting for MDPE pipe. Suitable for use below ground on cold water services. All fittings have a co-polymer polypropylene body, nut and thrust ring, acetal grab ring and nitrile seal. High impact resistant body and nut enables absorption of thermal and mechanical stress. Excellent pressure resistance, tested to 48bar. Simple and quick to connect - no need to dismantle the connecter nor chamfer the pipe, just cut the pipe, lubricate the seal, undo the nut a few turns, insert the pipe liner/insert, push the pipe in as far as it will go, tighten the nut and its done! Comfortably exceeds the performance requirements of UK Water Bylaws Scheme. MDPE Fittings are WRAS approved, certificate number 0507060. more...
|
 FloPlast MDPE Equal Tee 20mm £5.09
Equal Tee. Features: Domestic / Commercial; Demountable & Re-usable; BS6572; WRAS Approved. more...
|
 FloPlast MDPE Equal Tee 25mm £5.09
25 x 25 x 25mm. High quality compression fitting for MDPE pipe. Suitable for use below ground on cold water services. All fittings have a co-polymer polypropylene body, nut and thrust ring, acetal grab ring and nitrile seal. High impact resistant body and nut enables absorption of thermal and mechanical stress. Excellent pressure resistance, tested to 48bar. Simple and quick to connect - no need to dismantle the connecter nor chamfer the pipe, just cut the pipe, lubricate the seal, undo the nut a few turns, insert the pipe liner/insert, push the pipe in as far as it will go, tighten the nut and its done! Comfortably exceeds the performance requirements of UK Water Bylaws Scheme. MDPE Fittings are WRAS approved, certificate number 0507060. more...
|
 FloPlast MDPE Female Adaptor 25mm x £2.75
High quality compression fitting for MDPE pipe. 25mm MDPE to " BSP female thread. Suitable for use below ground on cold water services. All fittings have a co-polymer polypropylene body, nut and thrust ring, acetal grab ring and nitrile seal. High impact resistant body and nut enables absorption of thermal and mechanical stress. Excellent pressure resistance, tested to 48bar. Simple and quick to connect - no need to dismantle the connecter nor chamfer the pipe, just cut the pipe, lubricate the seal, undo the nut a few turns, insert the pipe liner/insert, push the pipe in as far as it will go, tighten the nut and its done! Comfortably exceeds the performance requirements of UK Water Bylaws Scheme. MDPE Fittings are WRAS approved, certificate number 0507060. more...
|
 FloPlast MDPE Male Adaptor 25mm x £2.79
High quality compression fitting for MDPE pipe. 25mm MDPE to " BSP male thread. Suitable for use below ground on cold water services. All fittings have a co-polymer polypropylene body, nut and thrust ring, acetal grab ring and nitrile seal. High impact resistant body and nut enables absorption of thermal and mechanical stress. Excellent pressure resistance, tested to 48bar. Simple and quick to connect - no need to dismantle the connecter nor chamfer the pipe, just cut the pipe, lubricate the seal, undo the nut a few turns, insert the pipe liner/insert, push the pipe in as far as it will go, tighten the nut and its done! Comfortably exceeds the performance requirements of UK Water Bylaws Scheme. MDPE Fittings are WRAS approved, certificate number 0507060. more...
|
 FloPlast MDPE Plastic Wall Plate Elbow 25mm x £9.99
For 25mm MDPE. more...
|
 FloPlast MDPE Reducing Coupler 25 x 20mm £3.99
High quality compression fitting for MDPE pipe that is simple and quick to connect. more...
|
 FloPlast Pipe Inserts 20mm Pack of 10 £3.49
For use with MDPE pipe. Suitable for use below ground on cold water services. Features: Domestic / Commercial; Demountable & Re-usable; BS6572; WRAS Approved. more...
|
 FloPlast Straight Pipe Coupling 20mm £2.24
Straight Pipe Coupling. Features: Domestic / Commercial; Demountable & Re-usable; BS6572; WRAS Approved. more...
|
 JG Speedfit 25mm MDPE Elbow £4.96
25mm. Suitable for 25mm MDPE pipe. more...
|
 JG Speedfit 25mm MDPE Equal Tee £7.5
25mm. Suitable for 25mm MDPE pipe. more...
|
 JG Speedfit 25mm MDPE Female Adaptor £3.4
25mm x ". more...
|
 JG Speedfit 25mm MDPE Inch Change Kit £2.49
Converts fitting to accept " imperial pipe. more...
|
 JG Speedfit 25mm MDPE Male Adaptor £2.84
25mm x ". more...
|
 JG Speedfit 25mm MDPE Plug £0.65
25mm. Pushfit Plug for use as internal end stop. more...
|
 JG Speedfit 25mm MDPE Stem Elbow £4.34
20mm x 25mm. more...
|
 JG Speedfit 25mm MDPE Straight £3.43
25mm. more...
|
 JG Speedfit MDPE Copper Adaptor 25 x 22mm £5.29
25 x 22mm. Slimline, push-fit adaptor with colour identification. Corrosion and lead-free. Non-toxic. Easy to install. more...
|
 JG Speedfit MDPE Reducer 25mm x 20mm £4.66
Slimline with easy push-fit connection. more...
|
 JG Speedfit Stop Cock 25 x 15mm £21.05
Domestic and demountable stop cocks with simple pushfit action for fast installation. BBA and WRAS approved. more...
|
 JG Speedfit Stop Cock 25 x 22mm £23.86
Domestic and demountable stop cocks with simple pushfit action for fast installation. BBA and WRAS approved. more...
|
 JG Speedfit Stop Cock 25mm £23.86
Domestic and demountable stop cocks with simple pushfit action for fast installation. BBA and WRAS approved. more...
|
 JG Speedfit UG101B MDPE Male Adaptor 20mm x £2.4
Male Adaptor. Features: Domestic; Demountable; BBA; WRAS. more...
|
 JG Speedfit UG102B MDPE Male Adaptor 25mm x £2.78
Male Adaptor. Features: Domestic; Demountable; BBA; WRAS. more...
|
 JG Speedfit UG103B MDPE Male Adaptor 32mm x 1 £4.46
Male Adaptor. Features: Domestic; Demountable; BBA; WRAS. more...
|
 JG Speedfit UG104B MDPE Male Adaptor 32mm x 1 £4.68
Male Adaptor. Features: Domestic; Demountable; BBA; WRAS. more...
|
 JG Speedfit UG201B MDPE Equal Tee 20mm £5.99
Equal Tee. Features: Domestic; Demountable; BBA; WRAS. more...
|
 JG Speedfit UG202B MDPE Equal Tee 25mm £6.83
Equal Tee. Features: Domestic; Demountable; BBA; WRAS. more...
|
 JG Speedfit UG203B MDPE Equal Tee 32mm £8.54
Equal Tee. Features: Domestic; Demountable; BBA; WRAS. more...
|
 JG Speedfit UG232AB MDPE Reducing Tee 32mm £11.02
Reducing Tee. Features: Domestic; Demountable; BBA; WRAS. Specifications: 32 x 32 x 25mm. more...
|
 JG Speedfit UG302B MDPE Elbow 25mm £4.5
Elbow. Features: Domestic; Demountable; BBA; WRAS. more...
|
 JG Speedfit UG303B MDPE Elbow 32mm £7.1
Equal Elbow. Features: Domestic; Demountable; BBA; WRAS. more...
|
 JG Speedfit UG401B MDPE Straight 20mm £2.99
Straight Connector. Features: Domestic; Demountable; BBA; WRAS. more...
|
 JG Speedfit UG402B MDPE Straight 25mm £3.05
Straight Connector. Features: Domestic; Demountable; BBA; WRAS. more...
|
 JG Speedfit UG403B MDPE Straight 32mm £6.25
Equal Straight Connector. Features: Domestic; Demountable; BBA; WRAS. more...
|
 JG Speedfit UG4501B MDPE Female Adaptor 20mm x £2.78
Female Adaptor. Features: Domestic; Demountable; BBA; WRAS. more...
|
 JG Speedfit UG4502B MDPE Female Adaptor 25mm x £3.06
Female Adaptor. Features: Domestic; Demountable; BBA; WRAS. more...
|
 JG Speedfit UG4620B MDPE Stop End 20mm £2.64
Stop End. Features: Domestic; Demountable; BBA; WRAS. more...
|
 JG Speedfit UG4625B MDPE Stop End 25mm £4.99
Stop End. Features: Domestic; Demountable; BBA; WRAS. more...
|
 JG Speedfit UG501B MDPE Reducer 20 x 25mm £4.99
Reducer. Features: Domestic; Demountable; BBA; WRAS. more...
|
 JG Speedfit UG502B MDPE Reducing Straight 32 x 25mm £9.49
Reducing Straight Connector. Features: Domestic; Demountable; BBA; WRAS. more...
|
 JG Speedfit UG601B MDPE Copper Adaptor 20 x 15mm £4.99
Copper Adaptor. Features: Domestic; Demountable; BBA; WRAS. more...
|
 JG Speedfit UG602B MDPE Copper Adaptor 25 x 22mm £4.75
Copper Adaptor. Features: Domestic; Demountable; BBA; WRAS. more...
|
 JG Speedfit UG603B MDPE Copper Adaptor 25 x 15mm £6.99
PE-Copper Coupler. Features: Domestic; Demountable; BBA; WRAS. more...
|
 JG Speedfit UG604B MDPE Copper Adaptor 32 x 28mm £7.99
PE-Copper Coupler. Features: Domestic; Demountable; BBA; WRAS. more...
|
 JG Speedfit UG801E MDPE Plug 20mm £0.99
Plug. Features: Domestic; Demountable; BBA; WRAS. more...
|
 JG Speedfit UG802E MDPE Plug 25mm £0.99
Plug. Features: Domestic; Demountable; BBA; WRAS. more...
|
 JG Speedfit UG803E MDPE Plug 32mm £1.49
Plug. Features: Domestic; Demountable; BBA; WRAS. more...
|
 JG Speedfit UGIC01 Imperial Converter 20mm x £4.24
John Guest Speedfit Imperial Converter 20mm Features: Domestic; Demountable; BBA; WRAS; WRAS Approved. more...
|
 JG Speedfit UGIC02 Imperial Converter 25mm x £4.61
John Guest Speedfit Imperial Converter 25mm Features: Domestic; Demountable; BBA; WRAS; WRAS Approved. more...
|
 JG Speedfit UGPWB2014 MDPE Wall Plate Elbow 20mm x £7.99
Wall Plate Elbow. Features: Domestic; Demountable; BBA; WRAS. more...
|
 JG Speedfit UGPWB2514 MDPE Wall Plate Elbow 25mm x £7.1
Wall Plate Elbow. Features: Domestic; Demountable; BBA; WRAS. more...
|
 JG Speedfit UGPWB2516 MDPE Wall Plate Elbow 25mm x £8.18
Wall Plate Elbow. Features: Domestic; Demountable; BBA; WRAS. more...
|
 JG Speedfit UGSTV2020 Stop Cock 20mm £21.05
Domestic and demountable stop cocks with simple pushfit action for fast installation. BBA and WRAS approved. more...
|
 JG Speedfit UTS147-DB MDPE Pipe Insert 20mm Pack of 10 £3.95
Pipe Insert. Features: Domestic; Demountable; BBA; WRAS. more...
|
 JG Speedfit UTS197-DB MDPE Pipe Insert 25mm Pack of 10 £3.95
Pipe Insert. Features: Domestic; Demountable; BBA; WRAS. more...
|
 JG Speedfit UTS251-DB MDPE Pipe Insert 32mm £1.38
Pipe Insert. Features: Domestic; Demountable; BBA; WRAS. more...
|
 JG UG301B Speedfit MDPE Elbow 20mm £3.99
Elbow. Features: Domestic; Demountable; BBA & WRAS Approved. more...
|
 MDPE Blue Pipe 20mm x 50m £27.99
50m. Blue MDPE underground water pipe for cold water supplies. Use with push-fit fittings. BS EN 12201 and Kitemark approved. Specifications: Approved for use with compression and pushfit fittings. more...
|
 MDPE Blue Pipe 25mm x 50m £29.99
50m. Polythene Blue PE80 Pipe. 12bar pressure. Plain end coil. Suitable for use below ground on cold water services. Simple and quick to connect. Use with pipe inserts. Manufactured to BS EN 12201: 2003 Pts 1, 2 and 5. more...
|
 MDPE Pipe Insert 25mm Pack of 10 £3.49
For use with 25mm MDPE pipe. Suitable for use below ground on cold water services. Excellent pressure resistance, tested to 48bar. Comfortably exceeds the performance requirements of UK Water Bylaws Scheme. MDPE Fittings are WRAS approved, certificate number 0507060. more...
|
 MDPE Plastic Stop Cock 20mm £15.99
Simple and quick to connect. Suitable for below ground cold water. Features: High Impact Body and Nut; Excellent Pressure Resistance. more...
|
 MDPE Plastic Stop Cock 25mm £15.99
Simple and quick to connect Stop Cock. Suitable for below ground cold water. Features: High Impact Body and Nut; Excellent Pressure Resistance. more...
|
 MDPE Plastic Wall Plate Elbow 20mm x £9.99
Simple and quick to connect. Suitable for below ground cold water. Features: High Impact Body and Nut; Excellent Pressure Resistance. more...
|
 MDPE Stop Tap 25 x 25mm £14.99
For use on 25mm MDPE. MDPE Fittings are WRAS approved, certificate number 0507060. more...
|
Buy plants |
Seeds | Plants
| Sheepskin slippers |
Sheepskin boots
Ugg Boots |
Design
| Deck |
Patio |
Lawns |
Questions
| Sheds |
Supplies |
Services
